SYWF-60 Water Bath Constant Temperature Shaking Incubator
Product Features
1. Large screen backlight LCD, "super fuzzy PID" control, compared with the traditional PID control mode has smaller temperature overshoot, faster stability time, better temperature control accuracy.
2. With power memory function, to avoid data loss due to power, crash.
3. With timing function, the time setting range is 0~9999 minutes (hours).
4. Using the heating system and water separation design, prevent leakage, higher safety performance.
5. With over-temperature alarm, low water level automatic power off function.
6. The side of the box body is equipped with a drainage valve, and the oscillation frame can be quickly disassembled and assembled to facilitate the replacement of experimental water and clean water tank hygiene;
7. The speed is controlled by the AC 220V input brushless servo motor with mature technology and high reliability, which is durable and accurate.
8. The use of high strength, high performance mechanical transmission design, low running noise, strong bearing capacity.
9. High quality stainless steel 304 sink, shaker and fixture.
10. Optional USB interface function.
Technical Parameter
Model | SYWF-60 |
Shaking frequency(rpm) | 20-200 |
Shaking frequency precision(rpm) | ±1 |
Orbit(mm) | 20mm |
Temp.variation(℃) | RT-99.9 |
Selectable | Universal spring fixture |
Temp. uniformity(℃) | ±1(37℃，100r/min） |
Control mode | P.I.D microcomputer intelligent control |
Max.capacity/layer（ml×piece） | 100×24 or 250×15 or 500×11 or 1000×6 |
Timing range | 0-9999 minutes(hours) |
Platform size (mm) | 340×470 |
Timing (Kw) | 2.3 |
Power Supply(V) | AC220±10% 50~60Hz |
Tank Size(W×D×H)(mm) | 600×420×260 |
Outline dimensions(W×D×H)(mm) | 860×475×393 |
Tagging：
1.The performance parameter test under no-load conditions is: ambient temperature of 20 ℃, ambient humidity of 50% RH
2.Working environment temperature: 5-25 ℃
3.To fully utilize the effectiveness of the equipment, the fixture configuration for all specifications of products leaving the factory shall be based on the standard capacity configuration.
