ZQP-100G/ZQP-100D Desktop Shaking Incubator
Product Features
1.Luxurious streamlined appearance design, large size transparent observation window, experiment at a glance;
2. Unique driving system design, stepless adjustable oscillation frequency, can meet the experimentalrequirements of different dissolved oxygen;
3. Operation panel adopts LCD large color LCD screen and navigation touch button;
4. Brushless DC servo motor drive, accurate speed measurement, long life, maintenance-free, and can be reversed free.
5. Unique motor overcurrent protection function, make operation safer, can greatly improve the service life ofmotor and control system.
6. Unique circulating air duct structure, forced convection, more uniform temperature;
7. With door control function, automatically stop running when opening the door;
8. With timing function, time setting range of 0 ~ 9999 (min) hours;
9. With memory function of power failure, avoid data loss caused by power failure and crash;
10. With over-temperature sound and light alarm, automatic power off function;
11. With fault self-diagnosis function;
Technical Parameter
Model | ZHP-100G | ZQP-100G | ZHP-100D | ZQP-100D |
Display | LCD | |||
Capactity(L) | 100 | |||
Shaking frequency(rpm) | 30-600 | 30-400 | ||
Shaking frequency precision(rpm) | ±1 | |||
Orbit(mm) | Ф0~50(The factory default amplitude is20mm) | |||
Temp.variation(℃) | RT +5~60 | -10~60 | RT +5~60 | -10~60 |
Shaking Plate Number | 1 | |||
Temp. uniformity(℃) | ±0.5 (37℃时) | |||
Control mode | P.I.Dmicrocmputer intelligent conteol | |||
Platform size (mm) | 400×370 | |||
Max.capacity/layer（ml×piece） | 100×23 or 250×16 or 500×9 or 1000×5 or 2000×4 | |||
Timing range | 0-9999 minutes(hours) | |||
Power(Kw) | 0.8 | |||
Power Supply(V) | AC220±10% 50~60Hz | |||
Outline dimensions(mm) | 550×780×640 | |||
Tagging：
1.The performance parameter test under no-load conditions is: ambient temperature of 20 ℃, ambient humidity of 50% RH
2.Working environment temperature: 5-25 ℃
3.To fully utilize the effectiveness of the equipment, the fixture configuration for all specifications of products leaving the factory shall be based on the standard capacity configuration.
